Rear Cable Exit Fitting - PHASE has been designed in such a way as to make fitting very easy. Simply screw the mounting bracket to the surface you intend to mount PHASE and slide PHASE into place.

PHASE can also be clipped into place if the cable is exiting via the base. In this case the universal Mounting Bracket should be screwed into place as shown ensuring that screw ‘A’ is not fully tightened. PHASE is then clipped into place as shown.

PHASE can be removed by disengaging the retaining clips, and following the steps for either installation method in reverse.

Simply push retaining clips towards fixed surface then slide PHASE off bracket

Bracket Dimensions:

For mounting onto soft furnishings, bespoke metal brackets can be provided which are bolted to the standard nylon bracket, which then attaches to the Phase body.

Beam Fixing - PHASE beam bracket is available in white and is suitable for beam fixings between 5 – 30mm

For mounting onto soft furnishings, bespoke metal brackets can be provided which are bolted to the standard nylon bracket, which then attaches to the Phase body.

Base Cable Exit Fitting -

Popular Socket Units

Pluto

Pluto-8

Planet

Pulse

Pulse-8

Panda

Panda-8

Phase